Alfa Romeo auto can be identified from the following data:
|VIN Vehicle identification numbers||– stamped on the vehicle|
|– on the type plate car|
|Engine Number||– on the motor block|
|Gearbox Number||– on the gear unit|
Alfa Romeo identification numbers VIN
Location of the VIN Vehicle Identification Nember in car A/R
Numbers used by alfa romeo stamped onto the floor, on the front passenger’s side
Also Alfa Romeo identification numbers VIN stamped on to the front right suspension strut dome
|Model||Sales Description||Vehicle identification numbers places|
|164||Car Alfa Romeo 164||VIN on the right suspension strut dome|
|167||Alfa Romeo155||on the right suspension strut dome|
|907||Vehicle Alfa Romeo 33||on the right suspension strut dome|
|916||Car Spider/GTV||VIN on the right suspension strut dome|
|920||Alfa Romeo 8C||Floor panel – front passenger seat|
|932||Vehicle A/R 156||on the right suspension strut dome|
|936||Alfa Romeo 166||VIN Floor panel – front passenger seat|
|937||Vehicle Alfa Romeo 147||on the right suspension strut dome|
|939||Car 159 / Brera||VIN Floor panel – front passenger seat|
|940||Giulietta||Floor panel – front passenger seat|
|955||Vehicle Alfa Mito||VIN Floor panel – front passenger seat|
VIN Lettering and numbers used by alfa romeo
The Vehicle Alfa Romeo identification numbers stamped on the end of the suspension strut contains two lines, each of which terminates with asterisks at the ends.
The Vehicle Identification Number stamped on to the floor on the front passenger’s side comprises one line, terminated with asterisks at the ends. In addition, the VIN or Vehicle Identification Nembers is interrupted by an asterisk at the 9th digit.
The first section (1st – 9th characters) consists of the manufacturer’s code and the model designation.
The 2nd section consists of the production serial numbers.
In General, VIN the following arrangements exist but differ according to the vehicle bracket:
VIN breakdown for Alfa Romeo auto
|1||=||(World Manufacturer Identity Code)|
|2||=||(932 = Model, 000 = Filler)|
|3||=||(consecutive serial number)£|
Variations from the standard composition of the vin
An „A“ can appear in the 7th position of the Vehicle Identification Nember (VIN) – no significance
At the 11th character of the Vehicle identification number,another numbers instead of „0“ can appear – this designates the manufacturing plant.
Location of the bracket plate for Alfa Romeo auto
Colour: silver, with black offset printing
Rivets: two-piece black constructions consisting of a pin and head Metal rivets on the Alfa Mito.
The following data appear on the factory plate:
– Name of the manufacturer
– The EU or ABE [Allgemeine Betriebserlaubnis – general road circulation certificate] approval number, where applicable
– Maximum authorised weight
– Total mass of the vehicle combination (vehicle + trailer)
– Authorised axle load, front axle- Authorised axle load, rear axle
– Power source type
– VersionAs a rule, the characters on the manufacturer’s plate are embossed.
The “1” has a “foot”; the “4” is open at the top.
On older models, the type plate (identification plate) was attached using conventional rivets or screws.
Alfa Romeo 8C
Because the model Alfa Romeo 8C is produced in Maserati in Modena, we find with this vehicle the factory sign as a sticker.
It is within the scope of the tailgate, upper area.
Vehicle checks possible using the type plate
Using the type plate it is possible to check for the presence of falsifications or complete forgeries, as the chassis number, motor numbers and the version listed on the plate correspond with one another.
- The model designation indicated by A and C in the picture type 932 Alfa Romeo 156 must always agree
- The entry indicated by B designates the power source type, in this case a 2400 cc Turbodiesel 5-Cylinder, Phase 3.
- The entry indicated by C i.e. 932B1B00 contains the following information:
|1B||=||Type code for the motor(must agree with the mechanism type shown B)|
|0||=||Driving and steering axles|
|0||=||Transmission type (manual)|
- Die ” The identifications of the different versions (C) are found in their own tables, which can be called up .
- The entry D found under 42 indicates the version and can be definitively matched to the variant by using the table .
Also the data tables for the individual models can be seen via the following.
The motor number is either stamped or else produced with a needle stamp on the powzer source block, on a smoothly ground surface.
It can be found in various positions on the mechanism block, depending on the motor bracket.
Position of the motor number A/R
Where it is located:
Breakdown of the engine number Alfa Romeo auto
The power source number has two parts.
1st Part: motor type number
2nd Part: production serial number
Additional power source number locations
When the mechanism is produced, stickers bearing the engine number are attached in two additional positions.
In time these may be obscured by dirt or can become detached.
The motor with the Alfa Romeo auto 8C is from Maserati, however, carries the call sign Romeo 8C and is visible only from below.
Since about 1999 gearbox numbers have been issued during production and can be attributed to individual vehicles.
This can only be done through the manufacturer.
Position of the gearbox number
The power source number is stamped onto the gear unit, on a smoothly ground surface. The number on 6-speed gearboxes is applied using a template and blue paint.
In addition, the gear number on a shield in the gear case is evident.
With the automatic gear the gear number is contained merely on a shield.
Breakdown of the gearbox number Alfa Romeo Auto
Gearbox numbers for Alfa Romeo auto have varying numbers of characters.
They generally have two parts.
|6138986||=||consecutiv Serial number|
For enquiries the whole gearbox number is required (i.e. variant and serial number).
Locations Breakdown of the gearbox number
Vehicle Keys Alfa Romeo Auto:
Source: Social media