Alfa Romeo VIN Number

Alfa Romeo VIN Number

Alfa Romeo VIN Number can be identified from the following data:

Location
Vehicle identification numbers – stamped on the vehicle
– on the type plate car
Engine Number – on the motor block
Gearbox Number – on the gear unit

Model:

Alfa Romeo VIN 

 Location of the VIN Alfa Romeo

Stamped onto the vehicle floor, on the front passenger’s side e.g: Alfa Romeo 166 – 159 – Brera – Mito

 Location of the VIN

 Location of the VIN
Close-up
 Location of the VIN ALFA Mito
Alfa Romeo Mito VIN Number (on 2 lines)

Alfa Romeo 147 and 156 VIN Number stamped onto the front right suspension strut dome

ALFA Mito Alfa Romeo 147

Alfa Romeo 147

Alfa Romeo 8C Location of the VIN
Alfa Romeo 8C VIN
Location of the VIN Alfa Romeo Giulietta
Location of the VIN Number Alfa Romeo Giulietta
Model Sales Description Vehicle identification numbers places
164 Car Alfa Romeo 164 VIN on the right suspension strut dome
167 Alfa Romeo155 on the right suspension strut dome
907 Vehicle Alfa Romeo 33 on the right suspension strut dome
916 Car Spider/GTV VIN on the right suspension strut dome
920 Alfa Romeo 8C Floor panel – front passenger seat
932 Vehicle A/R 156 on the right suspension strut dome
936 Alfa Romeo 166 VIN Floor panel – front passenger seat
937 Vehicle Alfa Romeo 147 on the right suspension strut dome
939 Car 159 / Brera VIN Floor panel – front passenger seat
940 Giulietta Floor panel – front passenger seat
955 Vehicle Alfa Mito VIN Floor panel – front passenger seat

Alfa Romeo VIN Number Lettering

The VIN stamped on the end of the suspension strut contains two lines, each of which terminates with asterisks at the ends.

The VIN stamped on to the floor on the front passenger’s side comprises one line, terminated with asterisks at the ends. In addition, the VIN is interrupted by an asterisk at the 9th digit.

The first section (1st – 9th characters) consists of the manufacturer’s code and the model designation. The 2nd section consists of the production serial number.

In General, Alfa Romeo VIN the following arrangements exist but differ according to the vehicle bracket:

*ZAR936000*00000001*

Alfa Romeo VIN Docoder 

ZAR 932000 01234567
1 2 3
1 = (World Manufacturer Identity Code)
2 = (932 = Model, 000 = Filler)
3 = (consecutive serial number)£

Variations from the standard composition of the vin

An „A“ can appear in the 7th position of the Vehicle Identification Nember (VIN) – no significance

At the 11th character of the Vehicle identification number,another numbers instead of „0“ can appear –  this designates the manufacturing plant.

Alfa Romeo Plate

On the radiator yoke on the right or the left of the bonnet lock or on the inner side of the wing, on right, viewed in the direction of travel (Spider/GTV) In the engine compartment, on the inside face of the right suspension strut dome (159 – Brera)

Location of the type plate Spider/GTV

Location of the type plate 159 - Brera
Alfa Romeo Plate On the floor panel in the boot – near the spare wheel well Mito
Location of the type plate Mito

Composition of the type plate (identification plate)

Composition of the type plate (identification plate)
Type plate on the ‘Mito’ Type plate on the „Giulietta“
Type plate on the Mito Composition of the type plate (identification plate) Giulietta

Colour:           silver, with black offset printing

Rivets:            two-piece black constructions consisting of a pin and head Metal rivets on the Alfa Mito.

The following data appear on the factory plate:

– Name of the manufacturer

– The EU or ABE [Allgemeine Betriebserlaubnis – general road circulation certificate] approval number, where applicable

– VIN
– Maximum authorised weight
– Total mass of the vehicle combination (vehicle + trailer)
– Authorised axle load, front axle- Authorised axle load, rear axle
– Power source type
– VersionAs a rule, the characters on the manufacturer’s plate are embossed.

The “1” has a “foot”; the “4” is open at the top.
On older models, the type plate (identification plate) was attached using conventional rivets or screws.

Plate Alfa Romeo 8C

identification plate alfa romeo 8C

Because the model Alfa Romeo 8C is produced in Maserati in Modena, we find with this vehicle the factory sign as a sticker.
It is within the scope of the tailgate, upper area.

 Vehicle checks possible using the Alfa Romeo plate

Using the type plate it is possible to check for the presence of falsifications or complete forgeries, as the chassis number, motor numbers and the version listed on the plate correspond with one another.

Vehicle checks possible using the type plate ALFA ROMEO

Steps:

  • The model designation indicated by A and C in the picture type 932 Alfa Romeo 156 must always agree
  • The entry indicated by B designates the power source type, in this case a 2400 cc Turbodiesel 5-Cylinder, Phase 3.
  • The entry indicated by C i.e. 932B1B00 contains the following information:
932 = Type code
B = Body shell
1B = Type code for the motor(must agree with the mechanism type shown B)
0 = Driving and steering axles
0 = Transmission type (manual)
  • Die ” The identifications of the different versions (C) are found in their own tables, which can be called up .
  • The entry D found under 42 indicates the version and can be definitively matched to the variant by using the table .

Also the data tables for the individual models can be seen via the following.