All information about Bimota motorcycle

In General Bimota motorcycle can be identified from the following numbers ,Location of Number,Vehicle identification number – stamped on the vehicle – on the type plate . Engine Number – on the engine block

Bimota motorcycle vin :

Location of the Bimota motorcycle VIN

The location of Bimota motorcycle VIN is stamped on in the following locations:

Bimota motorcycle Bimota motorcycle Bimota motorcycle

A
All models On the steering head on the right, in the direction of travel.
B Tesi 2 In the central area of the frame, on the right, in the direction of travel
C Tesi 3 In the central / lower area of the frame, on the right, in the direction of travel
Bimota motorcycle
Bimota DB 1 , 5/ DB6
Bimota motorcycle
Tesi 2D / Tesi 3D
Bimota motorcycle
SB8K

Bimota motorcycle VIN Lettering

The Bimota motorcycle VIN is stamped on at the works in Rimini.
The VIN is currently put on with a needle punch device. The height of the lettering differs depending on the model:
mm. 5,5: Tesi 2, SK 8
mm. 6: Tesi 3
mm. 7: DB 5, DB 6
The VIN location is covered with clear varnish when printing is completed.
On the SB8K, BT2D (Tesi 2D) and BT3D (Tesi 3D) the number is printed onto the aluminium frame.
On the DB06 (DB6) and DB05 (DB5) the number is printed onto the steel steering head and is:

• Stamped onto a non-painted right-angled spot whose background colour is black
• Stamped onto a spot which has already been painted (damage to the paint visible)

Bimota motorcycle

Stamped on steel
Stamped on a painted frame
An example with paint damage caused by stamping

Breakdown of the VIN with 17-characters

 

Bimota bike Type Plate / Manufacturer’s Badge:

Location of Bimota type plate / manufacturer’s badge

DB5
Left-hand side of the vehicle
Tesi 2D
Right-hand side of the vehicle
Tesi 3D
Left-hand side of the Bimota

 

SB8K
Right-hand side of the Bimota

DB6
Left-hand side of the Bimota

Form and appearance of the type pate/manufacturer’s badge

The manufacturers badge is a self-adhesive film made of plastic. It is destroyed by any attempt to remove it. The letters are 4 mm high.
Example for the SB8K
Example for the DB05

Manufacturer’s badges for the American market:

Pursuant to American regulations, the films, with a white background, have to be put on the steering head.

Pursuant to American regulations, the films, with a white background, have to   put on the steering head.
Example for the DB06 1000

Engine Number:

Location of the engine number

The engine number on all Bimota  bike is located on the engine block, on the driver’s left. It   stamped / needle punched onto the lowest area.


DB5
Left-hand side of the Bimota bike
Tesi 2D – 3D
Left-hand side of the Bimota motorcycle
SB8K
Right-hand side of the Bimota bike
DB6
Left-hand side of the Bimota motorcycle

 

 

Form and appearance of the engine number of Bimota

 

The respective engine makers (Ducati Bimota and Yamaha) do the stamping of the engine number themselves.

Example for a Ducati engine number on a DB6
Example for a Yamaha engine number on a SB8K

About Sharolyn

Sharolyn is a young woman in her twenties, interested in reviewing vehicles and the world of engines and delivering the best image to the visitor, so that we shorten a lot of searches, by providing complete information and solving your problems that may fall into your car.

Leave a Reply

Your email address will not be published. Required fields are marked *