Model:

Honda motor and cars  can identified in following numbers

Location Vehicle identification number – stamped onto the engine splash plate – on the type plate – on some models, behind the windscreen

It is not possible to derive the vehicle identification number in Honda vehicles from the engine or gearbox number, but it is possible to identify a range of possible Honda VIN number through the engine number.

Honda VIN Number

Honda VIN Number Location  

Normally honda vin number stamped onto the engine splash plate. On some models there is an additional number behind the windscreen (visible VIN)

 Appearance of the Honda VIN Number

All of this become the same blow figures like the engine number uses , so the single letters and Figures uniform 8.0 mms high and 4.8 mms wide.
The least impact depth lies with 0.2 mms.

The FIN is limited on the left and on the right with the mark X.

With the Visible FIN becomes the font Gothic German Institute for Standardization 30640 uses.
The single letters and figures are uniform 5 mms high and 4 mms wide.

Honda VIN Number Check

• 1980 – 1988
• 1988 – 1998
• from 1996 –
• America production
• Type Code

Type Plate:

2.1 Location of the type plate

Appearance of the type plate Honda

Honda Engine Number

Honda Engine Number Location

Honda engine number stamped into the engine block and on the bottom edge of the type plate

Honda Engine Number Check

The least depth of her smashed engine number amounts to 0.2 mms.

The engine number exists of two parts. The first part calls the engine type, the smashed letters and Figures are 8.0 mms high and 4.8 mms wide. The second part calls them the standard number and these blow figures are 5.0 mms high and 3.0 mms wide.

K20A4 2018127 Engine type Serial number

Examples of honda engine type names: C32B2 = 3.2 litre DOHC VTEC C30A4 = 3.0 litre DOC VTEC K20A1 = 2.0 litre DOHC VTEC K20A2= 2.0 litre DOHC VTEC K20A3 = 2.0 litre DOHC VTEC K20A4 = 2.0 litre DOHC VTEC sequential Multiport Fuel- injected K20A5 = 2.0 litre DOHC VTEC sequential Multiport Fuel- injected K20A6 = 2.0 litre DOHC VTEC sequential Multiport Fuel- injected K24A1 = 2.4 litre DOHC VTEC sequential Multiport Fuel- injected K24A3 = 2.4 litre DOHC VTEC sequential Multiport Fuel- injected L12A1 = 1.2 litre SOHC sequential Multiport Fuel- injected L13A1 = 1.3 litre SOHC sequential Multiport Fuel- injected L13A2 = 1.4 litre SOHC sequential Multiport Fuel- injected D14Z6 = 1.4 litre SOHC D15Y3 = 1.5 litre SOHC D16V1 = 1.6 litre SOHC VTEC D16W2 = 1.6 litre SOHC D16W5 = 1.6 litre SOHC VTEC D17A2 = 1.7 litre SOHC VTEC D17A5 = 1.7 litre SOHC VTEC D17A8 = 1.7 litre SOHC D17A9 = 1.7 litre SOHC VTEC 4EE2 = 1.7 litre DOHC 16V Diesel N22A1 = 2.2 litre DOHC Diesel Turbo

The information about the engine type and designations

Type codes for Honda cars

Honda Gearbox number

Honda gearbox number location and appearance

The Honda gearbox number is evident on a plastic adhesive who is right in the side of the gear case in immediate nearness of the engine number.

Fixing examples:

Honda gearbox number check

The gear number exists of two parts. The first part calls the gear type. The second part contains the standard number.

ARK5		1000001
Transmission type		Serial number

Examples of gear type names:
ARK5	=	5 speed manual transmission
ARK7	=	5 speed manual transmission
AST5	=	6 speed manual transmission
HMW	=	5 speed manual transmission
MCLA	=	5 speed automatic
MCVA	=	4 speed automatic (2WD)
MD4	=	5 speed Transmission ( Diesel )
MRVA	=	4 speed automatic (4WD)
SLXA	=	4 speed automatic
SLYA	=	CVT
SWLM	=	5 speed manual transmission
SWRA	=	CVT
X2M5	=	6 speed manual transmission
Z2M1	=	5 speed manual transmission
Z2M3	=	5 speed manual transmission

The information about the gearbox type and designations:

Type codes for Honda cars