All Husaberg Motorcycle by year listed in one easy to use resource.

In General , Husaberg motorcycle can be identified from the following numbers : Location of Number:Vehicle identification number – on the steering head, at the front, on the right -on the type sticker Engine number  (practical up to about the middle of MY 1998) – on the engine block – see engine number

Using the VIN, the dealer or importer (country to which it was exported) to whom the Husaberg motorcycle was first delivered can be identified via the manufacturing plant.

 

Husaberg motorcycle vin:

 

Location of the Husaberg motorcycle VIN

Normally on the steering head, on the right, in the direction of travel

Husaberg motorcycle VIN Lettering

The Husaberg motorcycle VIN has had 17 characters since the latest models entered production. It is ‘etched on’ by machine after painting and before assembly. A plastic film is then stuck over the VIN to protect against corrosion.

Replacement frames come either with no VIN or with the original VIN from the works.

VIN breakdown

EUROPE-Models

 

 

1 = World Manufacturer Identifier Code (WMI)

 

VBK nowadays is the only one currently used.

 

2 = Vehicle type

 

( HU for HUSABERG  KTM )

 

HU	FE 650e (until 2008)
HU	FS 650 (until 2008)
HU	FS 650c (until 2008)
HU	FE 450 (from 2009)
HU	FE 570 (from 2009)

 

3 = Net Engine performance (HP)

 

A	< 21		T	66 – 68
B	21 – 23		U	69 – 71
C	24 – 26		V	72 – 74
D	27 – 29		W	75 – 77
E	30 – 32		X	78 – 80
F	33 – 35		Y	81 – 83
G	36 – 38		Z	84 – 86
H	39 – 41		1	87 – 89
J	42 – 44		2	90 – 92
K	45 – 47		3	93 – 95
L	48 – 50		4	96 – 98
M	51 – 53		5	99 – 101
N	54 – 56		6	102 – 104
P	57 – 59		7	105 – 107
R	60 – 62		8	108 – 110
S	63 – 65		9	111 >

 

4 = Engine type

 

4 = Four-stroke engine

 

5 = Production line(currently only “0”))

 

6 = Check number

 

7 = Model Year

 

L	1990		1	2001
M	1991		2	2002
N	1992		3	2003
P	1993		4	2004
R	1994		5	2005
S	1995		6	2006
T	1996		7	2007
V	1997		8	2008
W	1998		9	2009
X	1999		A	2010
Y	2000		B	2011

 

8 = Place of manufacture M for Mattighofen/Austria

 

9 = Engine capacity class

2-stroke engine capacity class			4-stroke engine capacity class
0	< 125		0	< 250
1	125 – 199		1	250 – 349
2	200 – 249		2	350 – 399
3	250 – 299		3	400 – 499
4	300 – 449		4	500 – 539
5	450 – 549		5	540 – 569
6	550 – 599		6	570 – 599
7	from 600		7	600 – 799
			8	800 – 899
			9	from 900

 

10 = Serial number per engine capacity class

 

Factory Plate:

 

Location of the type plate

Normally attached to the steering head next to the VIN. It is a ready-made sticker, on which the details have been entered by means of a laser printer. According to the manufacturer, this foil will be destroyed by any attempt to remove it.

US models do not have factory plates. But these models do have stickers on various body parts on which the original type approval number can be seen.

Form and appearance of the type plate

Engine Number:

 Location of the engine number

The engine number has been etched on since MY 2006.

Location:

Breakdown of the engine number

6		820		*07600*
Model Year		Engine type		Serial number
0	2000	820	650 cc  (MY 2008)
1	2001	812	450 cc (from 2009)
2	2002	817	570 cc (from 2009)
	2003	805	390 cc (from MY 2010)
3	2004
4	2005
5	2006
6	2007
7	2008
8	2009
9	2010
A	2011
B

Replacement engines

 

These already have a complete engine number. And you can visit the Husaberg website to see more details ,and see the new Husaberg 2020 Motorcycle. Replacement engine housings are delivered without numbers as they fit several different engine types.

Vehicle Keys:

Nowadays all Husaberg dirt bike  models are normally delivered with two vehicle keys. If they are both present these will lock both the ignition and the handlebar lock. Any discrepancies can only be cleared up through the manufacturer.

HUSABERG motorcycles are not equipped with electronic immobilisers.